3. USER INTERFACE
3.1 DISPLAY AND ICONS
°C -°F
ON when a temperature or pressure is visualized
BAR-PSI
Real time clock: ON when the bottom display show the RTC
ON during the programming with time based parameter value
In function menu indicates the defrost delay counting
General alarm: blinking in case of alarm
Domestic hot water: ON when domestic hot water production is active
Dynamic Set point: ON dybnamic set point or Energy saving are active
Vset
Anti freeze heaters/ integration heating / boiler: ON if the heaters are switched ON
Water flow alarm / supply fan overload (air / air unit): blinking in case of water flow alarm or
supply fan overload alarm
Water pump: ON if at least one water pump is actives or if supply fan is active
1592015610 User manual IC200D EVO GB rel1.0 10.11.2015_rev10
IC200D
6/192