Settings; Modifying The User Parameters; User Menu; User \Circa And Circb Menu - DeDietrich EASYLIFE ALEZIO O HYBRID User Manual

6

Settings

6.1

Modifying the User parameters

Fig.30
Fig.31
6.2

User menu

Fig.32
1 Sub-menu available
2 Name of the PCB or circuit
Tab.16
List of User sub-menus
Sub-menu
CIRCA
CIRCB
DHW
EHC–04
CU-OH–04
SCB-04
HMI
Tab.17
Parameter Description
CP010 Zone flow temperature setpoint, used when the zone is set to a fixed
flow setpoint.
CP080 Room setpoint temperature of the user zone activity
Can be set from 5 °C to 30 °C
7613346 - v06 - 02072019
2
Description
Main heating circuit
Additional heating circuit B
Domestic hot water circuit
EHC–04 central unit PCB
CU-OH–04 central unit PCB
Additional PCB for circuit B
HMI control panel
Caution
Altering the factory settings may impair operation of the appliance.
1. Go to the User menu.
2. Select the desired sub-menu by pressing the
3. Confirm the selection by pressing the
4. Select the required parameter by pressing the
through the list of adjustable parameters.
5. Confirm the selection by pressing the
6. Modify the value of the parameter using the
7. Confirm the new value of the parameter by pressing the
8. Go back to the main display by pressing the
1
3 Setting parameters
6.2.1

User \CIRCA and CIRCB menu

CP : Circuits Parameters = Heating circuit parameters
or key.
key.
or keys to scroll
key.
or keys.

key.
3
MW-2000435-1
2
Name of the PCB or circuit
EHC–04
SCB-04
EHC–04
EHC–04
CU-OH–04
SCB-04
HMI
Factory setting Factory setting
CIRCA CIRCB
not available 50
16 16
200 ESL HYBRID
6 Settings
key.
33