Changing The Room Temperature Temporarily; Domestic Hot Water Temperature; Selecting The Operating Mode; Activating And Configuring A Timer Programme For Domestic Hot Water - DeDietrich ALEZIO S AWHP 4.5 MR User Manual

Fig.9
14 : 23 Zo.. Zone setup: ...
Cooling Schedule
Monday
6:00 Comfort 20.0°C
22.00 Reduce 16.00°C
Edit schedule entry
Comfort 20.0°C
6:00
Add time and Activity
Copy to other day
Set activity temperatures
4.9

Domestic hot water temperature

Tab.19
Mode
Scheduling
Manual
Hot water boost
Holiday
Antifrost
7685690 - v04 - 06042020
1. Select the icon for the zone to be programmed,
Off
Information on the current operating mode is given in the upper part
of the screen.
2. To modify the timer programme for the Cooling mode, select Zone
configuration > Cooling Schedule.
The programmed activities for Monday are displayed.
The last activity of the day remains active until the first activity of the
following day.
3. Select the day to be modified.
4. Carry out the following actions according to your needs:
Modify the timings for programmed activities.
Add a new activity.
Delete a programmed activity (choose the activity "Delete").
MW-1001267-04
Copy programmed daily activities to other days.
Modify temperatures linked to an activity.
4.8.4

Changing the room temperature temporarily

Regardless of the operating mode selected for a zone, it is possible to
modify the room temperature for a defined period. Once this time has
elapsed, the selected operating mode will restart.
1. Select the icon for the zone to be modified;
Off
2. Select Short temperature change.
3. Define the duration in Hour and in Minute.
4. Set the temporary room temperature set point for the circuit selected.
4.9.1

Selecting the operating mode

For the production of domestic hot water, you can choose between five
operating modes. We recommend the Scheduling mode which enables
domestic hot water production periods to be programmed according to
your needs and to optimise your energy consumption.
1. Select the
Off
2. Select the desired operating mode:
The domestic hot water is produced according to the timer programme
chosen
The domestic hot water temperature remains at the comfort temperature
permanently
The production of domestic hot water is forced at the comfort temperature
for a defined duration
The domestic hot water temperature is reduced during an absence period
to save energy
The equipment and the system are protected when the heat pump is in
frost protection mode.
4.9.2 Activating and configuring a timer programme for
domestic hot water
A timer programme can be used to vary the domestic hot water
temperature depending on activities during the day. This can be
programmed for each day of the week.
DHW tank icon.
Description
4 Operation
, for example.
, for example.
AWHP MIV-S 23