Otto Bock C‑Leg 3C98-2 Information For Users page 32

Hide thumbs Also See for C‑Leg 3C98-2:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 21
Fine tuning of the standing angle (if required)
INFORMATION
Very slow extension (Fig. 3): Actively standing up from sitting at this speed would take more than 5 seconds.
Unblocking the standing angle
The standing angle can be unblocked at any time by either a quick extension movement
or complete extension (7 – 0°, Fig. 4).
4
INFORMATION
Quick extension (Fig. 4): Actively standing up from sitting at this speed would take less than 2 seconds. The
standing mode function remains turned on. A new standing angle can be selected at any time by repeating
steps "Adjusting the standing angle" / "Fine tuning of the standing angle". 1st mode remains active.
Explanation of arrow symbols:
Flexion / Extension
Very slow extension
Slow extension
Quick extension
32 | Ottobock
1. To optimize the angle, very slowly continue to extend the joint (70 –
7°; Fig. 3).
2. The blocked joint can be fully loaded in the flexion direction.
70°
3
C‑Leg

Advertisement

Table of Contents
loading

This manual is also suitable for:

C-leg 3c88-2

Table of Contents