7.1.2.1 Connection of the robot arm to the control box
There is a heavy-load rectangular plug at the end of the robot arm cable. Insert the heavy-load
rectangular plug into the control box. Pay attention to the insertion direction, and lock the connector
after tight insertion, as shown in the following figure.
7.1.2.2 Connection of the control box to the mains supply
There is a heavy-load rectangular plug at the end of the mains cable of the control box. Connect
the local dedicated mains cable to the heavy-load rectangular plug. Pay attention to the insertion
direction, and lock the connector after tight insertion, as shown in the following figure.
Figure 7-2 Connection of the robot cable to the control box
Page 32 of 130
Doc No.:T202001005
www.elibot.cn