Table of Contents
Advertisement
1.4 Liabilities and Specifications
EC66, which is partly completed, may form a complete machine with other equipments.
Therefore, the information in this manual neither covers how to design, install and operate one
complete robot comprehensively, nor covers all possibilities of affecting safety of the peripheral
equipment of the complete system. The installation safety of the complete robot shall depend on how
the robot is integrated. The integrator should comply with the laws, regulations, safety specifications
and standards of the country where the integrator is located to implement the risk assessment for
design and installation of the complete system. The risk assessment is one of the most important
tasks that the integrator must complete. The integrator may implement the risk assessment process by
using the following standards for reference.
•
ISO 12100:2010 Safety of machinery - General principles for design - Risk assessment and risk reduction
•
ISO 10218-2:2011 Robots and robotic devices - Safety requirements for industrial robots - Part 2: Industrial
robot system and integration
•
RIA TR R15.306-2014 Technical report of industrial robots and robot systems - Safety requirements and
task-based risk assessment method
•
ANSI B11.0-2010 Safety of machinery – General requirements and risk assessment
The ELITE robot integrator should perform, but not limited to, following responsibilities:
•
Make a comprehensive risk assessment for the complete robot system.
•
Confirm that the whole system is designed and installed accurately.
•
Provide the user and the staff with training.
•
Create the operation specification of the complete system and clarify the instructions of using the robot.
•
Establish appropriate safety measures.
•
Eliminate the hazards or minimize all hazards to acceptable levels with appropriate methods during the
final installation
•
Pass the remaining risks to the end-user.
•
Mark the logo and contact information of the integrator on the robot
•
Archive the related technical documents.
For reference to applicable standards and legal guide, please visit the website: www.elibot.cn.
All safety-related information contained in this manual shall not be regarded as the warranty of
Suzhou Elite Robot Co., Ltd. Even though all safety instructions are followed, the personnel injury
Doc No.：T202001005
Page 13 of 130
www.elibot.cn
Advertisement
Table of Contents
