Personnel Safety - Elite EC66 User Manual

Hide thumbs Also See for EC66:
Table of Contents

Advertisement

1.3.3 Personnel safety

When running the robot system, safety of the operating personnel must be ensured first. The
general cautions are listed below, please properly take corresponding measures of ensuring safety of
the operating personnel.
1. All operating personnel using the robot system should receive the training and pass the
training courses hosted by Suzhou Elite Robot Co., Ltd. The user should ensure to fully grasp the
safe and normative operational process and have the qualification of operating the robot. For detailed
training, please contact with the company by E-mail: support@elibot.cn.
2. All operating personnel using the robot system should not wear loose clothing or jewellery
when working with the robot.Long hair must be tied back when working with the robot.
3. When the equipment runs, the robot is in the state of implementing imminent action probably
because the robot is waiting for a starting signal although it seems to have stopped. Even in this state,
the robot should be regarded as being in action.
4. Lines should be drawn on the floor to mark the range of action of the robot, in this way the
operator may know the range of action of the robot including the clamping tool (the manipulator, the
tool and so on).
5. Make sure that the safety measures (for example, guardrails, ropes, or protective screens) are
established near an operating area of the robot, as to protect the operator and the surrounding people.
The locks should be arranged in accordance with the need so that the person outside the operating
personnel in charge of operation cannot touch the power supply of the robot.
6. When using the operation panel and the teach pendant, operations cannot be implemented
until the gloves are taken off as there may be operational errors if the gloves are worn.
7. In emergency and abnormal cases, such as a person is clamped or surrounded by a robot, the
joint can be forced to move by pushing or pulling the robot arm hard (at least 700 N). If there is no
electric drive available, the robot arm may be moved manually only in case of emergency, however
the joint may be damaged.
Doc No.:T202001005
Page 12 of 130
www.elibot.cn

Advertisement

Table of Contents
loading

Table of Contents