Image Mosaic - NovaStar VX6s User Manual

VX6s All-in-One Controller
User Manual
Step 1 On the main menu screen, rotate the knob to select Preset Settings.
Step 2 Rotate and press the knob to select a preset. Then rotate the knob to select Save to
save the settings to the selected preset.
Step 3 You can load a preset through either of the following ways.
Figure 3-20 Preset settings

3.9 Image Mosaic

When the pixel count of the LED screen is larger than the loading capacity of a single
VX6s unit, the image mosaic function is required. The total loading capacity of all
cascaded VX6s units should be greater than or equal to the total pixel count of the
LED screen. The options are Disable, Equal and Unequal.



Note:



Example:
The total pixels of the LED screen is 3000×2000, which exceeds the loading capacity
of a single VX6s unit. You can use two VX6s units for image mosaic. The connection
is shown as below.
Rotate the knob to Load and press the knob to load the selected preset.
−
Press the number button on the device front panel to load a preset.
−
Disable
Disable the image mosaic function.
Equal
The areas loaded by all VX6s units are the same. You need to set the total H
pixels, total V pixels, row quantity, column quantity and current load area position.
Unequal
The areas loaded by all VX6s units are not the same. You need to set the total H
pixels, total V pixels, load area width, load area height, as well as the start X and
Y of the load area.
When the image mosaic function is enabled, Scale function will be disabled
automatically.
When HDMI or SDI input source is used for image mosaic, it is suggested you
use video splicers or video splitters in the front end.
When the image mosaic function is enabled, it is suggested you select the
current playback source as the sync source.
3 Menu Operations
18