Mounting The Transducer - Simrad EC150-3C Installation Manual

Simrad EC150-3C Installation Manual
9 Seal the top of the steel conduit with a Roxtec (or similar) multi-diameter cable
sealing.
Related topics
Installation summary, page 61
Using multi-diameter cable sealing, page 77

Mounting the transducer

When all the preparations have been made, the transducer is mounted. If required,
additional and more detailed procedures must be provided by the installation ship yard.
Prerequisites
The following requirements must be met before mounting the transducer:
• The physical location of the transducer has been determined.
• The mounting ring has been installed.
• The steel conduit is mounted with all installation work finalized.
Note
Whenever relevant, all drawings as well as the physical installation of each device must
be approved by the vessel's national registry and corresponding maritime authority
and/or classification society.
The following special tools are required for this installation:
• Torque wrench for the mounting bolts
• Loctite 290 (medium-high strength threadlocker)
• Lifting device
72
438371/A