Mounting The Transducer - Simrad ES120-7C Installation Manual

Installing the transducer

Mounting the transducer

When all the preparations have been made, observe this procedure for the mounting of
the transducer If required, additional and more detailed procedures must be provided by
the installation ship yard.
Prerequisites
The following requirements must be met before mounting the transducer:
• The physical location of the transducer has been determined.
• The mounting ring has been installed.
• The steel conduit is mounted with all installation work finalized.
Note
Whenever relevant, all drawings as well as the physical installation of each device must
be approved by the vessel's national registry and corresponding maritime authority and/or
classification society.
The following special tools are required for this installation:
• Torque wrench for the mounting bolts
• Loctite 290 (medium-high strength threadlocker)
• Lifting device
33
330254/B