Install The Riser; Install The Pump; Install The Submersible Bell - Kessel Aqualift S XL Instructions For Installation, Operation And Maintenance

4.2

Install the riser

1
3
2
• Use two screws <3>> to mount the riser
<1> on the pump <2>
4.4

Install the submersible bell

• Install the submersible bell as shown
• L = 180 mm
2019/12
Installation
Ill. [9]
4.3

Install the pump

1
• Place the pump <2> in the chamber. To do
this, lower it slowly onto the bottom of the
chamber.
Use the one-handed closure <3> to connect
the pump riser <1> to the backwater
preventer <4>
38 / 148
3 4
2
Ill. [10]
Ill. [11]
L
010-993