molex 207129 Series Specification Sheet

AT-1753 Air Crimp Head Tool
Air Powered
Crimp Tool Head
Krimptite   

FEATURES

Quick-change tool head for the 19279-0001 (AT-200)
Tooling kit is interchangeable with other kits in the 64001,64003, 64005, and 64007 Series
A precision user-friendly terminal locator wire stop holds terminals in the proper crimping position for each of
the three nests
Pneumatic powered crimp tools help reduce fatigue and discomfort from repetitive manual crimping

SCOPE

Products: Krimptite Terminals and Quick Disconnects, 24–26 AWG. This tool head is intended for use in the
19279-0001 (AT-200) either hand held or with optional bench adapter 19078-0307 (ATBA) and foot switch.

Testing

Mechanical
The tensile test, or pull test, is a means of evaluating the mechanical properties of the crimped connections.
The following charts show the UL specifications for various wire sizes. The tensile strength is shown in
pounds and indicates the minimum acceptable force to break or separate the terminal from the conductor.
The following is a partial list of the product part numbers and their specifications that this tool is designed to run.
We will be adding to this list and an up to date copy is available on www.molex.com.
Wire Size: 24 – 26 AWG 0.20 – 0.12 mm²
Terminal
Terminal No.
Eng. No. (REF)
19016-0075 M-1130
19016-0098 M-1136
190160-099 M-1136-032
19016-0112 M-1133
19069-0352 M-1113-02
19069-0354 M-1113-04
19069-0356 M-1113-06
19069-0358 M-1114-02
19069-0361 M-1118-06
19069-0363 M-1118-08
Doc No. 64007-0400 Release Date: 10-08-02
Revision: D Revision Date: 05-05-04
Application Tooling
Specification Sheet
Wire Size (AWG)
26
24
*UL - 486 A - Terminals (Copper conductors only)
*UL – 310 Quick Disconnects, Flags, Couplers
Wire Strip Length
In. mm
0.156 3.969
0.156 3.969
0.156 3.969
0.156 3.969
0.156 3.969
0.156 3.969
0.156 3.969
0.156 3.969
0.156 3.969
0.156 3.969
UNCONTROLLED COPY
*UL - 486 A *UL - 310
3 3
5 5
Wire Size: 24 – 26 AWG 0.20 – 0.12 mm²
Terminal No.
19069-0365
19069-0367
19069-0369
19069-0370
19069-0441
19087-0169
19087-0171
19087-0173
19087-0175
19087-0177
Order No. 64007-0400
Engineering No. AT1753
Wire Strip Length
Terminal
Eng. No. (REF)
In.
M-1118-10 0.156
M-1120-04 0.156
M-1122-00 0.156
M-1122-02 0.156
M-1120-06 0.156
M-1115-02 0.156
M-1119-02 0.156
M-1119-06 0.156
M-1119-08 0.156
M-1119-10 0.156
Page 1 of 6
mm
3.969
3.969
3.969
3.969
3.969
3.969
3.969
3.969
3.969
3.969