1. Manuals
  2. Brands
  3. molex Manuals
  4. Crimp tool
  5. 207129 Series
  6. Specification sheet

molex 207129 Series Specification Sheet

Tool kit, hand crimp tool
Hide thumbs Also See for 207129 Series:
Table of Contents

Advertisement

Quick Links

Download this manual
Hand Crimp Tool for CP 2.8 Receptacle Crimp Terminals
Tool Kit
Order No. 63823-4370
FEATURES
A full cycle ratcheting hand tool ensures complete crimps
Ergonomically designed soft handles
Precisely designed crimping profiles with simple contact positioning
Easy handling due to outstanding force ratio
Tool kits are easily installed into the Hand Crimp Tool or the 63816-0300 Power Crimp Head which is installed
into the 63816-0200 (110 V) or the 63816-0250 (220 V) Battery Powered Tool.
Many different Tool kits can be used with a single Battery Powered Tool.
This tool is IPC/WHMA-A-620 Class 2 and RoHS compliant.
SCOPE
Products: CP 2.8 receptacle for 18 - 20 AWG type TXL wire and
0.5 – 1.0mm
Terminal Series No.
Available in Reel only
64324-1049 64324-1149
64324
64324-2049 64324-2149
Customer to cut off terminal from reel: 0.30mm (.012") maximum Cut-off Tab.
Note: Terminal will accommodate the thin wall small insulation with the TXL type American wires and the ID or IR type metric wires.
DEFINITION OF TERMS
BELL MOUTH
WIRE
CUT-OFF
TAB
Doc No: ATS-6382343HM Release Date: 01-19-11
Revision: A
Application Tooling
Specification Sheet
type ID and IR wire with 2.80mm (.110") CMC Wire Seal color RED.
2
Terminal Order No.
AWG
18-20 TXL 0.5 -1.0 Type ID and IR 1.40 -2.15 .055 -.085 4.90 -5.10 .193 -.201
STRIP LENGTH
CONDUCTOR
BRUSH
CONDUCTOR
CRIMP
CRIMP
Revision Date: 01-19-11
Wire Size and Type
mm²
SEAM
SEAL
UNCONTROLLED COPY
Hand Crimp Tool
Order No. 63823-4300
Insulation Diameter
Strip Length
mm
In.
mm
BEND UP
TWISTING
BEND
DOWN
TYPE 4C
In.
ROLLING
Page 1 of 8

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 207129 Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for molex 207129 Series

Summary of Contents for molex 207129 Series

  • Page 1 Hand Crimp Tool for CP 2.8 Receptacle Crimp Terminals Application Tooling TYPE 4C Specification Sheet Tool Kit Hand Crimp Tool Order No. 63823-4370 Order No. 63823-4300 FEATURES A full cycle ratcheting hand tool ensures complete crimps  Ergonomically designed soft handles ...

  • Page 2: Installation

    Pull Force value must exceed the minimum pull force specifications listed. CAUTION: Install only Molex terminals listed above with this tool. Do not crimp hardened objects as damage can occur to the tool or die.

  • Page 3: Operation

    Hand Crimp Tool for CP 2.8 Receptacle Crimp Terminals To install the locator 1. Position the locator with the hole over the brass pivot shaft and snap it into place. LIFT UP ON To remove the locator THE LOCATOR 1. Open the crimp hand tool and unlock the locator latch. 2.

  • Page 4: Maintenance

    Hand Crimp Tool for CP 2.8 Receptacle Crimp Terminals INSULATION CONDUCTOR PUNCH WIRE STOP PUNCH BLADE WIRES AGAINST TERMINAL LOCATOR STOP SEAL LOCATOR WIRE PRE-STRIPPED Figure 5 TERMINAL INSULATION WIRE WITH SEAL CONDUCTOR ANVIL ANVIL Figure 6 5. Compress the terminal by squeezing the tool handles until the ratchet mechanism cycle has been completed. Release handles to open the jaws.

  • Page 5: Warranty

    12.7mm (1/2”) long, so there is no crimping of the insulation. Pull the terminal and wire at a rate no faster than 25mm (1.00”) per minute. See the Molex web site for the Quality Crimp Handbook for more information on pull testing.
  • Page 6 Hand Crimp Tool for CP 2.8 Receptacle Crimp Terminals The chart below shows all applications for this Tool Kit. Tool Kit Tool Tool Power Head Adapter Figure No. Order No. Order no. Description Order No. Description 63810-1050 Hand Crimp Frame (Short) 63810-1000 Hand Crimp Frame (Long) 63823-4370 63816-0200 Battery Power Tool (110 V)

  • Page 7: Hand Tool Parts List

    Hand Crimp Tool for CP 2.8 Receptacle Crimp Terminals HAND TOOL PARTS LIST Item Number Order Number Description Quantity 63810-1000 Hand Crimp Frame (Long) 63823-4370 Tool Kit with Locator 63823-4375 Locator (only) M4 X 8mm LONG BHCS RATCHET RELEASE SCREW WITH TOOL KIT LOCATOR ONLY M4 X 10mm...

  • Page 8: Power Head Parts List

    Tool Kit with Locator 63823-4370 63823-4370 M4 by 8 Long BHCS M4 by 18 Long BHCS M4 by 10 Long BHCS Figure 11 http://www.molex.com UNCONTROLLED COPY Doc No: ATS-6382343HM Release Date: 01-19-11 Page 8 of 8 Revision: A Revision Date: 01-19-11...

This manual is also suitable for:

63823-437063823-4300

Table of Contents