Table of Contents
Advertisement
C1120 S5 to II/O-Lightbus Interface
2
Functional description of Software
For further documentation it is assumed that the interface card C1120 is connected to a PC
running DOS with a serial interface cable to COMx.
2.1
Installation of Software
First step: Backup copy of installation disc
Do not forget to backup your installation disc and use the backup copy instead of the original
software disc.
-
switch on your PC
-
Use DISCCOPY to backup your installation disc
-
Use your backup disc for the installation.
Installation to hard disc
1.
switch on your PC
2.
(generate and) change to your destination directory
3.
insert the installation disc copy to floppy drive A:.
4.
change to drive A:;
4.
type: 'INSTALL C: <RETURN>'
The installation routine will copy all files to your destination directory of disc C: (or equiv.).
Start of program
start the C1120 setup program with 'PROGRAM <RETURN>' from your
destination directory of your PC.
Page 4 of 52
Beckhoff II/O-Lightbus System
Version 2.1
Date 27.06.97
Advertisement
Table of Contents
