Adjusting Feed Dog Up/Down Position - Janome Memory Craft 10001 Servicing Manual

The carriage moves to drop the feed dog when selecting the Embroidery Mode.
It raises the feed dog when selecting the Utility Stitches.
Note: The feed dog also automatically drops when selecting button sewing, basting stitches
and free quilting.
q
e
t

Adjusting Feed Dog Up/Down Position

r
e
w
u
y
To adjust:
1. Turn the Power ON; select the Embroidery
Mode and select pattern No.1.
2. Turn the Power OFF; remove the carriage
q
cover cap . (Unlock the hook from the
inside.)
3. Turn the Power ON and return the carriage to
the home position.
4. Loosen the drop plate Screws (2 pieces)
5. Adjust the drop plate
right if the feed dog does not drop when
selecting the Embroidery Mode or does not
rise (the drop plate does not set in to the
groove) when selecting the Utility Stitches.
6. Tighten the drop plate screws.
7. Reattach the carriage cover cap
8. Check the feed dog drops or raises properly.
q
Carriage Cover Cap
w
Screws
e
Drop Plate
r
Hook
t
Feed Dog Down
y
Feed Dog Up
u
Groove
33
w
e
moving it to the left or
q
.
.