Adjusting Key Position Of Touch Screen - Janome Memory Craft 10001 Servicing Manual

If a different pattern appears on the touch panel when you pressed the touch panel for
selecting a desired pattern, follow the instructions below.
q
PRESS + MARK
z

Adjusting Key Position of Touch Screen

w
v
x
c
b
Cancel
?
SET
To adjust touch panel:
1. While pressing the Needle Up/Down button
q
, turn the Power ON
Needle Up/Down button until the PRESS
MARK and + mark appears.)
q
Needle Up/Down Button
w
Power Switch
2. Press the + mark with the tip of the additional
spool pin. (Press
3. When you press the fifth +, ADJUSTMENT
END will appear.
4. Turn the Power OFF
5. Turn the Power ON and check the Touch
Panel again.
26
w
. (Keep pressing the
z b
to in order.)
w
.