Zone Manager - Immergas VICTRIX PRO 1 I Series Technical Sheet

50
50.1
The connection to the cascade regulator takes place with 2 BUS
data cables with maximum length of 50 metres and allows to:
• manage a maximum of one zone;
• set two room temperature values: one for day (comfort tem-
perature) and one for night (reduced temperature);
• manage the temperature of the D.H.W. (in combination with
a storage tank unit managed as zone);
• select the functioning mode for C.H. and D.H.W. for each
individual hydraulic circuit:
- comfort temperature functioning,
- reduced temperature functioning,
- adjustable antifreeze temperature functioning;
• manage the boiler flow temperature depending on the external
temperature and the room temperature, with seting of the
climatic curve;
• obtain information regarding the system:
- system temperature,
- operating mode,
- counter data,
- timer programme,
68
ZONE MANAGER (CODE 3.015264)
CHARACTERISTICS
VICTRIX PRO 1 I
In addition to the functions described for the cascade heat
adjuster, the cascade regulator allows to control all the im-
portant information regarding operation of the appliance and
the heating system with the opportunity of easily intervening
on the previously set parameters without having to go to the
place where the cascade regulator is installed. The climate
chrono-thermostat incorporated into the remote panel enables
the system flow temperature to be adjusted to the actual needs
of the room being heated, in order to obtain the desired room
temperature with extreme precision and therefore with evident
saving in running costs. Also allows to display the room temper-
ature and the effective external temperature. The zone manager is
powered directly by the cascade regulator via 2 BUS data cables.
- pump operation status,
- operation and values of the variable inputs;
• setting the functioning parameters:
- functioning times,
- system mode,
- domestic hot water,
- direct circuit, mixed 1, mixed 2,
- date and time;
• show on the display, via self-diagnosis system, any functioning
anomalies with error codes;
• show the date, time, day of the week and the boiler temperature
on the display.