Kit For Remote Management - Immergas VICTRIX PRO 1 I Series Technical Sheet

Wall-hung modular condensing boilers for high power
Table of Contents

Advertisement

VICTRIX PRO 1 I
53
KIT FOR REMOTE MANAGEMENT (CODE 3.024244)
(EXCLUSIVELY IN COMBINATION WITH THE CASCADE AND ZONE REGULATOR)
Using the remote management kit it is possible to control the
single boiler or cascade of boilers remotely. The remote man-
agement kit only works in combination with Cascade and zone
regulator code 3.015244, which requires software version 3.0
or later (the software version of the cascade and zone regulator
will appear on the screen during the initial phase after start-up).
The interface for remote management is powered with 230V and
can be installed on a wall or on DIN guides. The measurements
of the remote manager are: (H=160 x L=143 x D=48).
The interface serves to establish direct or remote communica-
tion, through a personal computer, to one or more cascade and
zone regulators (up to a maximum of 5).
The WEB interface makes it easier to manage parameters from
the PC, and is available at the following website:
ourhome.eu
by selecting the required/available language, and by registering
on-line by entering the serial number provided on the remote
manager.
Remote management:
This offers the possibility of managing central heating systems
by viewing and changing various operation parameters, all
from a station that operates independently and remotely from
the systems.
The system can can be installed through an Ethernet network
or company connection, or through an ADSL router or modem,
which cascades up an external connection.
To use it on a local network, simply establish a connection
REMOTE MANAGEMENT
www.controly-
through the browser on your system (for example, Internet Ex-
plorer), by entering its IP address (see the instructions handbook
supplied with the remote manager kit).
When the connection is established, enter user name and pass-
word to view and change all the parameters contained in the
cascade and zone regulator.
System error alerts via e-mail:
This provides the possibility of receiving alerts on failures or
anomalies at the e-mail addresses entered at the time of regis-
tration, with messages reporting the error codes (only if you are
connected to the on-line portal).
KEY:
1
2
1
- Phase fuse
2
- Power supply 230 V 50 Hz
3
- Ethernet network port
4
- System bus connection
5
- USB port
4
5
3
71

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents