14 Victrix Pro 35 1 I - 55 1 I Adapter Kit In Replacement Of The Previous One - Immergas VICTRIX PRO 1 I Series Technical Sheet

14 VICTRIX PRO 35 1 I - 55 1 I ADAPTER KIT IN REPLACEMENT OF THE PREVIOUS ONE

RANGE OF WALL-HUNG BOILERS IN SINGLE CONFIGURATION (CODE 3.023966)
This kit is composed of just two gaskets 44x34x2 (1) and two
insulated pipes (2), to compensate for the variation in the centre
distances between flow and return on VICTRIX PRO 35 1 I-55 1
I boilers, which is 300 mm in comparison to the centre distance
between flow and return on the previous range of high output
wall-hung boilers (ex. VICTRIX 50-75), which is 390 mm.
Accordingly, it is possible to install VICTRIX PRO 35 1 I-55
1
KEY:
1 - Gasket 44x34x2
2 - Insulated adapter pipe
5 - Generator
M - Flow
R - Return
18
1 I models in place of the models from the previous range of
VICTRIX 50-75 wall-hung boilers in single configuration.
The elements illustrated in the figure and any safety kit for single
boilers must be installed according to the relative documents
of reference.
M
2
5
R
1
2