Keysight Technologies N9010B EXA Installation Note page 9

Licensing the New Options
Installation Procedure over USB
1. Locate the Option Upgrade Entitlement Certificate (5964-5178) from the kit.
2. Redeem the Option Upgrade Entitlement Certificate by following the instructions on the
Certificate.
3. After redeeming your Option Upgrade Entitlement Certificate you will receive an email with an
attached License File.
4. Locate a USB storage device. Perform a virus scan on this device before use.
5. Save the License File to the root directory of the USB Storage Device.
6. Connect the USB Storage Device to one of the analyzer's USB ports. Connect a mouse to
another USB port. Windows will detect the new hardware and may display the configuration
menu shown in Figure
Figure 1 USB Storage Device Configuration Menu
7. The analyzer will automatically consume the License File. (This may take a few minutes) When
the License File is consumed the Keysight License Manager will display a "Successful License
Installation" message similar to the one shown in
Figure 2 Successful License Installation
Installation Note N9010-90066
1. This menu may be configured according to your preferences.
Figure 2.
Installation Procedure
9