Keysight Technologies N9010B EXA Installation Note page 18
Hide thumbs
Also See for N9010B EXA:
- Installation note (54 pages) ,
- Installation notes (27 pages) ,
- Getting started and troubleshooting manual (91 pages)
Advertisement
Installation Procedure
Top Brace
1. Refer to
Figure
9. To remove the top brace (1), use the T-10 driver to remove the eight
panhead screws (3) (0515-0372), four on each side, attaching the braces to the chassis. Also
remove and discard the twelve flathead screws (4) (0515-1946) attaching the top brace to the
boards.
Figure 9
Top Brace Removal
18
Installation Note N9010-90066
Advertisement
