Keysight Technologies N9010B EXA Installation Note page 3

Option HL3, 2nd IF Output (CR3) and Arbitrary IF Output (CRP)
Upgrade Kit
Products Affected:
Serial Numbers:
Options
To Be Performed By:
Estimated Installation Time:
Estimated Adjustment Time:
Estimated Verification Time:
a. To ensure that these newly installed options are functioning properly, the procedure that follows
includes the requirement of performing certain adjustments and performance verification tests.
However, the completion of these tests does not guarantee that the instrument meets all advertised
specifications.
Software and test equipment is required for making adjustments and for performance verification
testing.
Information on how to obtain this software can be found at:
www.keysight.com/find/calibrationsoftware
While Keysight does recommend that a full calibration be performed after the installation of this
upgrade, the end user must ultimately determine whether they want this service or not. If a full
calibration is required, arrangements regarding the level of calibration must be made between the
end user and the calibration provider
Installation Note N9010-90066
Option HL3, 2nd IF Output (CR3) and Arbitrary IF Output (CRP) Upgrade Kit
N9010B, EXA Signal Analyzer
N9020B, MXA Signal Analyzer
All
CR3, CRP
(X) Keysight Service Center
(X) Personnel Qualified by Keysight
( ) Customer
2.0 Hours
4.5 Hours
3.5 Hours
a
3