SSV Works RZ3-3A Manual page 39

G. To properly align the box, slide the box firmly toward the front of the vehicle. It should sit approximately 1/4" from the factory glove
box mount. If not properly installed, the dash of the vehicle will not securely push back into position.
H. While applying pressure keeping the enclosure secure against
the front wall, tighten the top brackets, as they tighten they
will bend slightly to add pressure and avoid any vibration, now
tighten the lower L bracket to the enclosure
J. For 2015-up model year vehicles, install the supplied bracket using
the short screws provided and adjust forward or back so glove box
latch closes tight
G
H
I. For 2014 model year vehicles remove the factory glove box
door latch. Mount the latch to the supplied bracket and
secure to the enclosure using the short screws provided
J
WP-RZ3GBS10
G
I