SSV Works RZ3-3A Manual page 13

SSV WORKS, 201 N. Rice Ave Unit A, Oxnard, CA 93030
www.SSVworks.com | Phone: 818-991-1778 | Fax: 866-293-6751
WARRANTY INFORMATION:
All SSV Works enclosures are covered by a limited lifetime warranty against defects
in material or workmanship. All SSV Works Electronics are covered by a limited 1 year
warranty against defects in material or workmanship. All SSV Works Speakers are
covered by a limited 1 year warranty against defects in material or workmanship. Labor
for replacement of defective components is not covered. Contact SSV Works for further
warranty information.
TOOLS NEEDED FOR INSTALLATION
- Wire Crimpers
- Wire Strippers
- T-30 Torx Driver
- Drill with 1/8", 1/4" and
1/2" Drill bit
PARTS LIST IMAGES
1. RZ3-F65K Enclosures
(1 pair)
Drill Point
RZ3-F65
2017 Polaris RZR Kick Pod, Cut Template
Driver Inside Template
Cut along parimeter
Drill Point
4. Driver Side Inside Template
- #2 Phillips Screwdriver
- Scribe or Marker
- Utility Knife
2. M6 x 16mm Screws x 6
RZ3-F65
2017 Polaris RZR Kick Pod, Cut Template
Driver Outside Template
Drill Point
Drill Point
Cut along parimeter
5. Driver Side Outside Template
RZR XP1000 & 2015+ RZR900
!
PARTS LIST
1. RZ3-F65K Enclosures (1 pair)
2. M6 x 1.0 Screws x 6
3. M6 Washers x 6
4. Driver Side Inside Template
3. M6 Washers x 6
Drill Point RZ3-F65
2017 Polaris RZR Kick Pod, Cut Template
Passenger Inside Template
Cut along parimeter
Drill Point
6. Passenger Side Inside
Template
SSV Works 6.5" Speaker
Front Kick Panels
Please read and understand these
instructions completely before
installation to avoid possible injury, or
damage to the accessory or vehicle.
5. Driver Side Outside Template
6. Passenger Side Inside
Template
7. Passenger Side Outside
Template
RZ3-F65
2017 Polaris RZR Kick Pod, Cut Template
Passenger Outside Template
Drill Point
Drill Point
Cut along parimeter
7. Passenger Side
Outside Template
13