3
SPECIFICATIONS
(12)Error clear request (YF)
(a) This signal turns ON when clearing the error flag (XF) and the disconnection state
(b) For the ON/OFF timing, refer to the filed of the disconnection state monitor signal
monitor signal (XC).
However, the setting value error of the intelligent function module switch setting
cannot be cleared.
Correct the setting value.
(XC) and the error flag (XF).
3.3 I/O Signals Transferred to/from Programmable Controller CPU
3.3.2 I/O signal details
1
2
3
4
5
6
7
8
3
- 24