Auto Refresh Settings - Mitsubishi MELSEC-Q Series User Manual

5
UTILITY PACKAGE (GX Configurator-TI)
5.5

Auto Refresh Settings

[Purpose]
Configure the Q68TD-G-H01's buffer memory for automatic refresh.
[Operating procedure]
"Start I/O No.*"
[Setting screen]
[Explanation of items]
(1) Items
Model side Buffer size
Model side Transfer word count : Displays the number of words to transfer the CPU
Transfer direction
PLC side Device
"Module type"
* Enter the start I/O No. in hexadecimal.
"Module model name"
: Displays the buffer memory size of the setting
item that can be transferred (fixed at one word).
device from the head device (fixed at one word).
: " " indicates that data are written from the
device to the buffer memory.
" " indicates that data are loaded from the buffer
memory to the device.
: Enter a CPU module side device that is to be
automatically refreshed.
Applicable devices are X, Y, M, L, B, T, C, ST, D,
W, R, and ZR.
When using bit devices X, Y, M, L or B, set a
number that can be divided by 16 points
(examples: X10, Y120, M16, etc.)
Also, buffer memory data are stored in a 16-point
area, starting from the specified device number.
For example, if X10 is entered, data are stored in
X10 to X1F.
5.5 Auto Refresh Settings
1
2
3
4
5
6
7
8
5
- 16