Grundfos CIM 150 PROFIBUS DP Functional Profile And User Manual page 33

A.3 Login
Login
Fig. 2
User name Enter user name. Default: admin.
Password Enter password. Default: Grundfos.
The user name and password can be changed on the
webserver under "User Management".
A.4 PROFINET IO configuration
This web page is used to configure all the parameters relevant to
the PROFINET IO protocol standard. All settings can also be
configured from a standard PROFINET IO configuration tool, for
instance Siemens Primary Setup Tool (PST). It is available on the
internet.
Real Time Ethernet Protocol Configuration - PROFINET IO
Fig. 3
Object
Device Name
IP Address
Subnet Mask
Gateway
Use DHCP
Grundfos product simulation
Description
The PROFINET IO device name. It must be unique.
The static IP address for CIM 500 on the PROFINET IO network. It must be unique.
Configure the subnet mask for CIM 500 on the PROFINET IO network.
Configure the default gateway for the PROFINET IO network.
CIM 500 can be configured to automatically obtain the IP address from a DHCP server on the network.
CIM 500 can be put in product simulation mode to generate realistic simulated values of all the
PROFINET IO input data modules. It will thus be possible to connect a PROFINET IO master to a CIM
500 fitted in a CIU unit or E-box without installing this device in a real industrial process system. In an
office environment, it can then be verified that communication works and data are received and
handled correctly by the PROFINET IO master application program, e.g. PLC program, before installing
the device. To enable product simulation, select a product type from the drop down list. Product
simulation is terminated by a module power cycle.
Pumpland.ru
33