Installation At A Later Date; Mounting Variants; Intersection With Other Systems - OBO Bettermann PYROLINE Rapid Mounting Instructions

Installation at a later date

74 | EN
9 Installation at a later date
You can add cables to the fire protection duct system PYROLINE
at any time. To prevent harm to the cables during routing, we recommend
opening the duct route at as many points as possible and laying the
cables, rather than pulling the cables along long duct routes. See also
"4.6 Routing cables" on page 21.
Here is how to install cables at a later date:
• Dismantle connectors and fittings.
• Open the duct lid.
• Insert cables.
• Attach the duct lid firmly.
• Attach the connectors and fittings and screw them tight.
• Check the tightness.
• Check, and if necessary restore, the equipotential bonding along the
whole duct section.
10

Mounting variants

10 1

Intersection with other systems

A duct route mounted on the ground can be passed over as shown in Fig.
71 (does not apply to BSKM 0407).
Fig 71: Create intersection as pass-over
Rapid
®
OBO Bettermann