OBO Bettermann PYROLINE Rapid Mounting Instructions page 70

Creating cable outlets
70 | EN
To create a multiple outlet in the middle of a section, install a T branch
piece and seal the multiple outlet with a foam seal BSKM-KA 0407,
BSKM-KA 0711 or BSKM-KA 1025 as shown below (see Fig. 67).
Note! I n a T branch piece, the distance from a multiple outlet to a wall/ceiling
penetration must be at least 500 mm, measured from the centre of the T
branch piece.
Fig 67: Multiple cable outlet in a T branch piece
OBO Bettermann