Table of Contents
Advertisement
Mounting instructions PYROLINE
5 6
Mounting fittings
5 6 1
Mounting flat angles
Do not mount ducts at a 90° angle, as shown in Fig. 30 and Fig. 31, so
that they overlap. The overlapping of the flat angle (BSKM-FW 0407,
BSKM-FW 0711 and BSKM-FW 1025) ensures the necessary tightness.
•
Attach the flat angle and fix it, e.g. with six fire protection bolt ties (see
"4.1 Fastening material" on page 17).
Fig 30: Mounting flat angles
BSKM-FW 1025
BSKM-FW 0711
Fig 31: Mounting spacing, flat angles
Rapid fire protection duct
®
Direct mounting on the ceiling, wall or floor
max. 35 mm
max. 35 mm
BSKM-FW 0407
BSKM-FW 0711
BSKM-FW 1025
BSKM-FW 0407
max. 35 mm
EN | 31
Advertisement
Table of Contents
