Table of Contents
Advertisement
1.
3.
5.
7.
Mounting instructions PYROLINE
7
Push the threaded rods through.
Screw together the fitting with the supplied nuts and the wall con-
nection plate with threaded rods, nuts and washers in such a way
that the fitting is pressed evenly against the duct and the wall, thus
closing the wall connection tightly.
8
Using the connecting screw (contained in the scope of delivery of the
wall connection), create the equipotential bonding (see "8.1 Create
equipotential bonding" on page 72).
Fig 63:
Mounting a wall connection on a solid wall
Rapid fire protection duct
®
Mounting on a support system
2.
4.
6.
8.
EN | 65
Advertisement
Table of Contents
