Table of Contents
Advertisement
1.
3.
5.
7.
Mounting instructions PYROLINE
7
Screw together the fitting with the supplied nuts and the wall connec-
tion plate with fire protection bolt ties (e.g. MMS-plus 7.5x50) in such
a way that the fitting is pressed evenly against the duct and the wall,
thus closing the wall connection tightly.
8
Using connecting screws (contained in the scope of delivery of the
wall connection), create the equipotential bonding (see "8.1 Create
equipotential bonding" on page 72).
Fig 61:
Mounting a wall connection on a solid wall
Rapid fire protection duct
®
Mounting on a support system
2.
4.
6.
8.
EN | 63
Advertisement
Table of Contents
