Avery Dennison 64 Series Service Manual page 75

03/10 Rev. 5.04-04
Steps 3 and 4 ease the assembly of the
brush tubes:
3. Wrap some cloth or paper around the
tube, in a way that the brush bristles do
not become kinked (3).
4. Grasp the tube using tongs. Screw one
of the shipped screws (4) into the not
bevelled end of the tube and out again.
Keep in mind, that the screws have to
be screwed into different ends of the
tube (end without bevel)!
Given brush tubes for the 64-06, this is
the tube end with the shorter distance to
the brush!
Continued next page.
SERVICE MANUAL
64-xx – 64-xx Dispenser
Service Mechanics
3
4
75