Table of Contents
Advertisement
03/10 Rev. 5.04-04
Housing
Important instructions
The housing may only be opened by
authorised trained personnel!
Before opening the housing, switch off
the device and pull out the mains plug! If
this is not done, there is a danger of
accidents being caused by dangerous
contact voltage.
Overview of housing parts
The housing consists of the following
individual parts:
– Front hood (1)
– Rear hood (2)
– Left front housing (3)
– Right front housing (4)
– Right lower housing (5)
– Cutter cover (6)
– Plug cover (7)
Front hood
Disassembling
After being opened the front hood (1)
can be removed by unscrewing four
(Phillips) screws (8).
The right front housing (4) remains
affixed to the front hood.
Assembly
Tighten the screws with 200 Ncm.
Tool
– Phillips screwdriver
SERVICE MANUAL
64-xx – 64-xx Dispenser
2
3
7
4
Service Mechanics
4
6
5
8
8
8
6
1
1
8
Advertisement
Table of Contents
