Avery Dennison 64 Series Service Manual page 82

03/10 Rev. 5.04-04
Assembly
1. Switch off the printer; unplug the power
cord.
2. Replace the two cross-head screws (5)
at the printer rear side by the two hex
socket screws (1) which came with the
filter.
3. Screw the filter holder (6) to the printer
rear side. Use the 4 cross-head screws
(7) which came with the filter.
4. Put a liner (3) into the filter housing (2).
5. Press the filter housing onto the filter
holder. Turn the screw (4) by a quarter-
turn.
CAUTION! -
An exhausted filter liner can cause
the power supply to overheat and
the device to break down.
Replace the filter liner regularly,
at least in monthly intervals.
For notes about cleaning/replacing the
filter read the user manual, topic section
"Maintenance".
SERVICE MANUAL
64-xx – 64-xx Dispenser
2
Service Mechanics
1
2
3
4
5 5
6
7
3
82