Table of Contents
Advertisement
7.
Set the items in "Basic Settings" as follows.
[Navigation window] [Parameter] [Module Information] [RJ71LP21-25] [Basic Settings]
8.
Set the link refresh settings as follows and click the [Apply] button.
[Basic Settings] [Link Refresh Settings] [Detailed Setting]
9.
Write the set parameters to the CPU module of the control station. Then reset the CPU module or power off and on the
system.
[Online] [Write to PLC]
In this example, default values are used for parameters that are not shown above. For the parameters, refer to
the following.
MELSEC iQ-R MELSECNET/H Network Module User's Manual (Application)
7 COMMUNICATION EXAMPLES
7.1 Cyclic Transmission Program
7
33
Advertisement
Table of Contents
