Festo CPX-2AE Series Brief Description page 21

3.3 Setting the DIL switches (only 2AE-U-I, 4AE-I and
2AA-U-I)
Set the signal range for modules 2AE-U-I, 4AE-I and
2AA-U-I by using the switch elements of the 2-element DIL
switches (see following table).
DIL 2AE-U-I/2AA-U-I
switch 0 Signal range
Channel 0:
0 to 10 V
Channel 0:
0 to 20 mA
Channel 0:
4 to 20 mA
DIL Appropriate for channel 1
switch 1
Module 4AE-U-I does not have a DIL switch. Conduct all
settings here by using parameterisation. Further informa-
tion can be found in the manual for the CPX analogue
I/O modules (P.BE-CPX-AX-...).
Festo CPX-AX 1107d English
4AE-I
Signal range
Channel 0 + 1:
0 to 20 mA
Channel 0:
4 to 20 mA
Channel 1:
0 to 20 mA
Channel 0:
0 to 20 mA
Channel 1:
4 to 20 mA
Channel 0 + 1:
4 to 20 mA
Appropriate for channel
2 + 3
21