Configuring The Foreground - Siemens DMS8000 MP4.60 Manual

3.5
Building Technologies
Fire Safety & Security Products
6 Foreground layer

Configuring the foreground

Once you have defined your foreground layers and depths, you need to configure
the foreground layers by dragging the points from Composer tree into the
appropriate graphical maps. The MapMaker graphic tool provides a command for a
quick arrangement of the screen for optimal operations with MM8000 /MT8001
points.
To configure a foreground layer, proceed as follows:
1. Select a depth from the right drop-down arrow (located near top of screen).
2. Select the associated foreground layer from the left drop-down arrow.
3. Select the adjust dimension icon
map on right (arrange screen windows) for optimal drag and drop.
4. Drag points from the tree, one at a time, and drop them onto the correct
position on the map.
 While editing the map, the description text of the points that have been
deposited on the map are temporarily shown in red in the Composer tree and in
the Children tab view of the parent node. When you close the graphical map
editor (saving your work), the points you deposited on the map are indicated in
the tree by a green square next to the node.
Note: The selected objects can be data points as well as sequence command
points.
To resize an initial object on the map, proceed as follows:
1. Select the object.
2. Drag the edges to the size you want.
3. Select Set default object size icon
Note: Another way to resize an object is to right-click the object you just resized
and select Set as Default Size. You can also set the best default size for
subsequent objects of different types.
Guide to map configuration
Configuring the foreground
Associates foreground layer to the depth.
to display the Composer tree on left and
.
3
17
A6V10062441_a_en
30.06.2013