Defining Depths - Siemens DMS8000 MP4.60 Manual

3.4
Building Technologies
Fire Safety & Security Products
Drop points: Select to enable dragging and dropping points on the layer

(foreground only). This option can be used to prevent unintended operations
from being performed on a layer.
Discipline Type: Specify a discipline to assign to a layer to filter what can be

seen when activity occurs.
Min/Max Visibility: Specify the zoom factor range within which the layer is

visible.
Note: The Layers window can be resized and maximized as necessary, and
layout and position settings are saved and reapplied next time it is opened.

Defining depths

Once you have the foreground layers, you can define the required depths,
combining background and foreground layers at a given zooming factor.
Selecting a zoom factor
Selecting a zoom factor allows you to create a new depth easily.
Select a zoom factor by using the zoom tools shown in the following figure.

Note: To quickly select a zoom factor, click on a map and zoom in and out using
the mouse wheel.
1
Zoom tools
Item Name
1 Zoom-in
2 Zoom control
3 Zoom-out
4 Zoom-in a given
window
Guide to map configuration
2 3 4
Description
Zooms in the map in steps.
Zooms in and out by moving the slider.
Zooms out the map in steps.
Zooms in a selected window in the map.
3
Defining depths
15
A6V10062441_a_en
30.06.2013