Defining Camera Views - Siemens DMS8000 MP4.60 Manual

Guide to map configuration
3

Defining camera views

3.7
20
Building Technologies
Fire Safety & Security Products
Adding a point link
Technical notes:
Graphic links are hidden on the maps displayed during event treatment

(operating procedure steps).
The graphic link symbol, i.e. the navigation icon, cannot be modified.

Single clicking a graphic link does not select the related node in the tree.

Graphic links are not considered when using the blue arrow commands (Next /

Previous Page icons) for graphical navigation.
Graphic links added to maps will also be available on manual pages.

Defining camera views
The graphic tool provides commands to define the area covered by a camera view.
At runtime, this allows for the association of the points located within that area to
the camera images.
Note: This functionality is not available for the MT8001 Management Terminal.
To define a camera view, do the following:
 You have already configured the map background and foreground, including
camera points.
1. Right-click a camera.
2. Select Show coverage area in the menu that appears.
 A polygon appears indicating the camera coverage area.
3. Use the interior squared dot of the polygon to move and orient the coverage
area.
A6V10062441_a_en
30.06.2013