Associating Manual Pages To Points - Mt8001 - Siemens DMS8000 MP4.60 Manual

Guide to map configuration
3
Creating manual pages
3.9.2
34
Building Technologies
Fire Safety & Security Products
To associate a page to a data point, proceed as follows:
1. Select the desired point node in the tree.
2. Select the Event Treatment tab.
NOTE: To associate the page to the point in the Plant Browser, select the Plant
Browser tab.
3. Select the manual page in the Preset pages pane.
4. Select the Assign icon
Associate a page to a point manually – MM8000
Item Name
1 De-assign
2 Move up
3 Move down
4 Assign
Associating manual pages to points – MT8001
If you have created one or more pages for a point on a map, you can choose to
have a specific page or an entire map displayed during event treatment for that
point.
To do this, proceed as follows:
1. Select the desired point node in the tree (it must already be deposited on a
map).
2. Select the Pages tab.
 The map and any pages you created for it display in the Maps/Pages pane.
.
4
Description
Select to de-assign manually a page.
Move a page up in the runtime display order.
(The top-most map is the first to be displayed, followed in
sequence to the bottom-most.)
Move a page down in the display order.
Select to assign manually a page to a point.
1 2 3
A6V10062441_a_en
30.06.2013