Siemens SIMATIC HawkEye 1600T Series Manual page 70

Smart camera
Table of Contents

Advertisement

Appendix
E
Updating Firmware on 1600T Cameras
FIGURE E–1.
In the top pull-down menu, select the Smart Camera you want to update.
2.
In the bottom pull-down menu, select the desired firmware version.
3.
Enter the user name (default is hawkeye) and password (default is vision) for
4.
the Smart Camera
Click Update Firmware.
5.
You see the progress of the Update procedure as a set of stages and progress
bars. After completion, either of the following is displayed:
Click Exit.
6.
E-2
Smart Camera Update Main Screen
A success message indicating that your Smart Camera has been
successfully updated
A failure message with the reason for the failure and what stage of the
Update failed
SIMATIC HawkEye™ 1600T Smart Camera Guide
Select
Camera
Select
Firmware
Version
Rev. 1E, Nov 2007

Advertisement

Table of Contents
loading

Table of Contents