Siemens SIMATIC HawkEye 1600T Series Manual page 23

can connect to the camera, each one with their private peer-to-peer connection
and each one monitored by a special *heartbeat* connection on port 49079 (see
Table 2–2).
TABLE 2–2.
Port Name Protocol
File Transfer Port FTP
Telnet Port Telnet
DHCP Client Port DHCP
Web Server HTTP
Routing Port RIP
IO Service Port TCP
Pic and Live TCP
Acquire Port
Camera RPC Port TCP
Connection TCP
Monitor Port
Reports & TCP
Statistics Port
PartQ Retrieval TCP
Port
Rev. 1E, Nov 2007
SIMATIC HawkEye™ 1600T TCP/IP Connectivity
Number Note
21 Allows the Host to send and retrieve files from the
HE1610T.
23 Console terminal to the Device, runs the vxWorks OS
console target shell.
68 Supports the assignment of IP addresses from a DHCP
server for the HE1610T Smart Camera.
80 Allow access to boot parameters when HyperTerminal
over Serial and Bootloader menu is not convenient.
520 Receives and updates local routing tables from the
Network.
49049 Controls IO on the camera, i.e., Physical and Virtual IO
and receives IO change notification events back to the
client.
49050 Takes pictures and goes to Live Video.
49059 When in control, sends editing and runtime commands
to the camera; for example, Start, Stop, Download,
Flash, etc...
49079 This special connection is created automatically
whenever any of the other connections above is made
by a client (when using the vskit libraries or by
FrontRunner). It monitors the connections and provides
a timely mechanism to report connection drops to the
client (within a few seconds).
49200 Used by FrontRunner and vskit programming library for
camera reports. Reports are defined by the avp and
can include any results with or without images.
Connections can be programmed to be lossless, i.e.,
inline with the Inspection or lossy, i.e., at a particular
rate per second.
49201 Retrieves the reports records stored inline in camera
memory.
SIMATIC HawkEye™ 1600T Smart Camera Guide
SIMATIC HawkEye™ 1600T
2
2-3