The Smart Camera family supports 16 MB of Non-Volatile memory for Kernel
and Job saving (3 MB maximum avp size) and 64 MB of RAM for operation.
The camera sensor (depending on model) supports acquisitions of:
•
1024x768 (XGA) images at a maximum rate of 30 frames/sec
•
648x494 (VGA) images at a maximum rate of 60 frames/sec
It also supports 8 opto idolated digital IO lines in addition to a dedicated light
connector for controlling and powering an external light (SIMATIC HawkEye™
1610T configuration only). Partial scan at higher frame rates is supported.
There is full support for:
•
Acquisition modes, including:
–
–
–
•
SIMATIC HawkEye™ 1600T I/O:
–
–
–
–
Features and Benefits
•
Compact, all-in-one smart camera configuration for ease of integration
•
Built-in digital I/O, serial communications and Ethernet networking for open
connectivity to other equipment
•
Flexibility in lighting and optics selection for broad applicability
•
Comprehensive, fully-featured vision processing toolkit
•
Graphical environment for fast application development
Rev. 1E, Nov 2007
Exposure (64 usec to 58.8 msec)
Analog gain (0.1 to 63.0)
Offset (-255 to +255)
1 trigger
1 strobe output
3 opto isolated outputs
4 additional opto isolated general purpose I/O fully assignable in the avp
SIMATIC HawkEye™ 1600T Smart Camera Guide
Features and Benefits
1-3
1