Chapter
2
System Components
Beeper
The SIMATIC HawkEye™ 1600T Smart Camera's beeper is user configurable
and indicates Pass/Fail conditions.
Mounting & Wiring the SIMATIC HawkEye™ 1600T
•
Mount the camera securely in its camera stand (not supplied).
•
Make sure the camera is mounted at the correct distance for the optics
you've purchased.
•
Connect the Ethernet cable (X4) and the power cable (X1) to the SIMATIC
HawkEye™ Smart Camera (see "Rear Panel" on page 2-6). Connect the
SIMATIC HawkEye™ Smart Camera to a 24V power supply.
2-10
SIMATIC HawkEye™ 1600T Smart Camera Guide
Rev. 1E, Nov 2007