Download Table of Contents Print this page

Updating Firmware On 1600T Cameras; Updating The Firmware With Smart Camera Update - Siemens SIMATIC HawkEye 1600T Series Manual

Smart camera

Advertisement

Table of Contents
E
APPENDIX E
This appendix contains two procedures for updating your Smart Camera:
"Updating the Firmware with Smart Camera Update" on page E-1
"Updating the Firmware with the Bootloader" on page E-3

Updating the Firmware with Smart Camera Update

Note: Do not cycle power on the Smart Camera during this procedure.
Use the following procedure to update the firmware on your SIMATIC
HawkEye™ 1600T Smart Camera with the Smart Camera Update utility:
Start the Smart Camera Update utility by selecting Start > SIMATIC >
1.
SIMATIC Visionscape > Tools > HawkEye 1600(T) Firmware Update.
The Smart Camera Update utility displays its main screen, as shown in
Figure E–1.
Rev. 1E, Nov 2007
Updating Firmware on 1600T
Cameras
SIMATIC HawkEye™ 1600T Smart Camera Guide
E
E-1

Advertisement

Table of Contents
loading

Table of Contents