Preface
Training Center
SITRAIN™ Siemens Training
Siemens Training (SITRAIN) offers a range of courses on Machine Vision and
Symbology Reading. Training classes are conducted in Norcross, Georgia and at
locations across the USA. SITRAIN also offers courses on PLC, Drives,
Controls, HMI, NET, Process Control, Analyzers and Instrumentation, Electrical
and Power, Safety and more. Details of current SITRAIN course offerings can be
viewed at http://www.automation.usa.siemens.com/sitrain/
For training in Germany, see:
http://www.sitrain.siemens.com/html_76/f_11_sensors.html
To view Machine Vision and Symbology course offerings, please click on the
"Automation" link in the middle of the page and then the "Vision and Sensors"
link from the list that is presented. Alternatively, please contact the Siemens
Training Registrar at (800) 241-4453.
Technical Support
How to reach technical support for all A&D products
•
With the Support Request form on the Web:
http://www.siemens.de/automation/support-request
•
Telephone: + 49 180 5050 222
•
Telephone: 800 333-7421 (USA)
•
Fax: + 49 180 5050 223
Further information about our technical support is available in the Internet at
http://www.siemens.com/automation/service
Service & Support on the Internet
The Siemens Service & Support team provides you with comprehensive
additional information on SIMATIC products in its online Internet services.
http://www.siemens.com/automation/service&support
x
SIMATIC HawkEye™ 1600T Smart Camera Guide
Rev. 1E, Nov 2007