Required Products - Mitsubishi Electric MELSEC iQ-F Series Quick Start Manual

1 PREPARATION
Before Connecting Safety Application
Safety Devices Example

1.3 Required Products

In the safety application example described in this manual, the safety main module (FX5-SF-MU4T5) is connected
to the FX5U CPU module, and the following safety devices are connected to the safety main module.
FX5U CPU module
*
(1 module)
*: Firmware version "1.200" or later and serial number 17X**** or later
Safety light curtain
(manufactured by SICK AG)
In addition to the following products, a power supply and terminal block for the safety light curtain may be required.
Sender
(C4P-SA03011C00)
Receiver
(C4P-EA03011D00)
The sender and receiver of the safety light curtain must be installed and adjusted correctly.
Point
For the installation and adjustments, refer to the manual of the manufacturer.
Contactor
(Supporting mirror contact )
*1
× 4
(manufactured by Mitsubishi Electric: SD-Q11
This safety device is described as "safety
contactor" in this manual.
*1: Mirror contact is a mechanism that
detects welding of a main contact.
*2: Auxiliary contact is NC contact.
Required Products
Safety main module
(FX5-SF-MU4T5)
+
System plug for sender
(2076832)
+
System plug for receiver
(2093097)
Personal computer
)
*2
GX Works3
*
*: Version 1.060N or later
Emergency stop pushbutton
(ES21-SB10G1 manufactured by SICK AG)
+
External connection cable
(YF2A15-020UB5XLEAX2)
+
External connection cable
(YF2A15-020UB5XLEAX2)
Pushbutton switch
(automatic return type)
× 2
1
2
3
4
5
6
11