Iridium SHOUT ns General Description Manual page 52

columns, which reflect values set in the settings section on the right. The ID column indicates
the identifier assigned to the geofence. This identifier is used to reference the geofence when
the SHOUT ns sends arrive and depart notices and when updating geofence parameters via
AT commands or remote updates. The Options column shows a combined bit field value of
the options parameters (000 (0) – 111 (7), with each digit corresponding to Enable, Arrive
notice, Depart notice). The Profile column indicates the tracking profile assigned to the
geofence.
Descriptions of the geofence settings listed on the right of the window are as follows.
ID
Enable
Arrive notice
Depart notice
Profile
NAL Research Corporation (451-01001.B)
Figure 22. Geofences window.
Defaults to an incremented integer value. It can be set to any 8-
character string to identify the geofence (e.g., "USA", "BASE", and
"DANGERZN").
Enables this specific geofence.
Sends a NAL format GPS version 6 tracking report with short code
18 (GPS Report Version 6 Format [2]) when entering this specific
geofence.
Sends a GPS version 6 tracking report with short code 19 when
exiting this specific geofence.
Sets a tracking profile to be used while inside this specific geofence.
52