Iridium SHOUT ns General Description Manual page 49

6.2.2.3.1.3 Power-up Delay
This parameter enables the power-up delay to a specified date and time. The date and
time format is as follows: YYYY/MM/DD HH:MM:SS (i.e., 2012/11/30 12:54:23). When in
Tracking mode and immediately after power is applied to the SHOUT ns, the device remains
in a power-saving sleep mode until the user-specified date and time. At which point, the
device enters Tracking mode. The AT command for this setting is ^PUPD.
6.2.2.3.2 Encryption Tab
The SHOUT ns can send and receive data in AES 256-bit encrypted format. Figure 20
displays the SatTerm encryption setting window once the Encryption tab's "Change" button is
clicked. The GUI allows the Crypto Officer Password to be changed, the Encryption to be
enabled or disabled, and the Encryption Key or Decryption Key to be set.
Figure 20. Other Profile window with Encryption tab and Change Encryption Settings
A factory-default Crypto Officer Password is initially set on the SHOUT ns. This default
password must be changed before any encryption properties can be set. To change the default
NAL Research Corporation (451-01001.B)
window.
49